Telmar.com Telmar.com eTelmar.net Home Page The Advertising Media Internet Center

Telmar Home Page Telmar.com

 

Media Guru

Guru Search Results: 6 matches were found

Wednesday, December 13, 2000 #4041
My question is regarding print measurement. For a consumer print campaign (magazines, regional) I've been asked to provide a pithy statement (to be read by a board of directors with limited marketing savvy) adressing the effectiveness of the proposed print campaign. Our account planner asked for reach and frequency, which I don't believe I can provide. I can provide circulation and readership (which would equate to reach, I believe, but that doesn't account for duplication). I am to complete the sentence "This plan results in..." Am I missing something? Thanks!

The Media Guru Answers(Sunday, December 17, 2000 ):
You have not made clear why you believe you cannot provide reach and frequency. Once you have the readership of individual publications you can begin to combine their audiences in a rough way, by "random probability." This method will understate duplication somewhat, because related publications and particularly multiple issues of the same publication duplicate more than merely randomly. Using duplication between simialr national magazines, as documented by services like MRI, you can reasonable estimate the duplication in your own schedule and thereby estimate your reach and frequency.


Tuesday, April 25, 2000 #3420
We are putting together a sponsorship package that incorporates TV spots, our company newsletter, our website and our fleet vehicles -- is it possible to estimate a combined reach/frequency for all four mediums combined?

The Media Guru Answers(Tuesday, April 25, 2000 ):
The TV is easy, using standard methods, of which you are probably aware.

The other estimates must start from simple counts of the newsletter circulation, web traffic and - the toughie - persons exposed to your fleet. Most simply, after getting a standard TV reach, convert the other media impressions to ratings and combine by "random probability."


Thursday, March 16, 2000 #3326
Dear Guru: I would like to know if there is any equation to calculate media mix reach?

The Media Guru Answers(Thursday, March 16, 2000 ):
There are several, equivalent ways to express the arithmetic to combines media according to random probability, which has been found generally adequate for the purpose of multimedia combination.

Here's an easy one:

  1. Work with two reaches at a time
  2. Treat the reach of each medium as a decimal (50 reach is 0.5)
  3. Add reach of medium A and medium B
  4. Multiply reach of medium A by Reach of medium B
  5. Subtract the product of the multiplication from the sum of the addition

Example:

  • Reach of medium A = 40, reach of medium B = 55
  • 0.4 + 0.55 = 0.95
  • 0.40 x 0.55 = 0.22
  • 0.95 - 0.22 = 0.73
  • Combined reach is 73

To add additional media, treat the combination as medium A and the next medium as B.

In some cases, a planner may have access to research which shows that an adjustment should be made for actual, measured, duplication between different media, rather than use the "random probability" formula above. In that case, more sophisticated reach calculating software packages, such as those from Telmar allow you to make the calculation and build in known adjustments.


Tuesday, September 14, 1999 #2792
What can you tell me about reach-based planning? Thank you in advance.

The Media Guru Answers(Tuesday, September 14, 1999 ):
> The usual assumption is that print and broadcast duplicate with random probability, there is no special, greater or lesser likelihood that persons in the audience of the print schedule will also be or not be in the audience of the broadcast schedule.

Mechanically. the combination may be calculated in a few equivalent ways. The Guru finds it easiest to consider the reaches as decimals (50% reach = 0.50).

Subtract the reach of print from 1 and multiply this by 1minus the reach of broadcast. Suppose print has a 40% reach and broadcast has 55%.

By subtracting 0.4 from 1 (1 - 0.4 = 0.6), you have the probabilty of the target not being exposed to print. Subtract 0.55 from 1 to get the probability of not being exposed to broadcast (1 - 0.55 = 0.45)

Multiply these two together (0.6 * 0.45 = 0.27) and you have determined there is a 27% probability of people not being exposed to either of the combined media, or a 73% reach.

This formula is typically used in media software to combine different media.

Certainly there are cases where there is a somewhat better than random probabilty of media duplication, such as TV Guide combining with a TV schedule, but that's the exception, calling for judgement.


Wednesday, September 01, 1999 #2759
Is the random probability formula used to combine reach for different media also valid when looking at effective reach (i.e. 4+ level)?

The Media Guru Answers(Thursday, September 02, 1999 ):
If you mean, can you combine the 4+ reach of one medium with the 4+ reach of another medium to get the 4+ reach of the two combined media, the answer is no.

Among those who were reached 2 or 3 times by each medium, some will now be reached 4 or more times and some will not, yet these people are not considered by combining only the two four+ groups. There are also those reached only once by the first medium and three times by the other, etc. A new, overall calculation of the frequency distribution must be done, to determine the 4+ of the combination.


Friday, April 30, 1999 #2481
Is there any way to calculate duplication across a media plan using several media (e.g. print and radio and TV), or can I only get a duplication analysis within a media (radio duplicaton and then another duplication factor for print, etc , etc) I use telmar for research with simmons and arbitron access and we also use JDS for buys.

The Media Guru Answers(Friday, April 30, 1999 ):
The standard assumption in media planning is that duplication between different media is purely at random. Therefore, the random probability formula is used:
  • Express the reach of each medium as a decimal (50% reach = 0.5)
  • Multiply the reach of one medium by another to determine the duplication.
  • Subtract the duplication from the sum of the two reaches to get the net reach

So, if you have a 40% reach in TV and a 55% reach in Print, multiply
0.4 x 0.55 to get 0.22
subtract 0.22 from 0.4+.55 and get 0.73 or
73% reach of the combined media.

There are a variety of ways to do the calculation. The Guru actually prefers to use the probablilty of not seeing each medium (reach as a decimal subtracted from 1.0) When these are multiplied they give the net probability of not seeing any of the media. When this result is subtracted from 1, the final result is net reach. This style is particulary useful for combining several media at once.The example would combine this way:

  • 1-0.4 = 0.6
  • 1-0.55 = 0.45
  • 0.6 x 0.45 = 0.27
  • 1-0.27 = 0.73 or

    73% reach.

Telmar's "Media Mix" program uses these assumptions.



Back